MSK

Silicone rubber composition

High transparency, high tear strength, wear resistance, fatigue resistance, excellent compression permanent deformation, harmless to the body

This product is a two-component platinum catalyzed solid precipitation silicone rubber with a mixing ratio of 1:1.

This product is a two-component platinum catalyzed solid precipitation silicone rubber with a mixing ratio of 1:1.

This product is an additive liquid silicone rubber with low viscosity and good foam removal. It is a kind of two-component liquid silicone rubber that is catalyzed and solidified by platinum complex. It is composed of basic compounds, cross-linking agents, catalysts, fillers and additives. These materials do not contain heavy ...

A kind of silicon gel that feels soft after curing. It is a two-component high strength liquid silicone rubber, which is catalyzed and solidified by platinum complex. It is composed of basic compounds, cross-linking agents, catalysts and additives. These materials do not contain heavy metals and aromatic solvents, and have no toxic effect on human body.

MR2318AB liquid silicone rubber is a kind of silicone material that is cured by heating. This two-component elastic silicone is designed to package and protect electrical products under harsh conditions. It can be conditionally applied to the surface coating of textile products< Br/>MR2318AB liquid silicone rubber uses new tec...

This product is a room-temperature two-component pressure-sensitive adhesive, which has the main characteristics that common organic adhesives (such as acrylic acid, natural rubber) and other materials of the same type do not have, including a wide range of use temperature, consistency, surface with low adhesion energy, adhesi...

MR2341AB high thermal conductivity silicone potting adhesive is a kind of room temperature/heating curing additive silicone material. This two-component elastic silica gel is designed to encapsulate and protect electronic products under severe conditions< Br/>MR2341AB high thermal conductivity silicone potting adhesive uses a ...

MR2349AB silicone heat conductive potting adhesive is a kind of room temperature/heating curing additive silicone material. This two-component elastic silica gel is designed to encapsulate and protect electronic products under severe conditions.

MR2365AB liquid silicone rubber is a kind of two-component silicone rubber material cured by heating. This product is designed for textile products. It can be conditionally applied to the surface coating of textile products, screen printing, and label making.

Usage:1. Mix A, B and phosphor powder in proportion until there are no lumps and lumps. After the consistency is uniform, completely defoaming under vacuum< Br/>2. Pour the rubber into the needle barrel for glue filling, and put the needle barrel with the rubber into the vacuum for bubble drainage again< Br/>3. Before glue fil...

MR6619A/B two-component silicone potting adhesive is a kind of thermal conductive silicone electronic potting adhesive with good thermal conductivity and excellent flow performance. It has low viscosity before curing. After mixing the two components, it can be cured at room temperature, and curing can be accelerated by heating...

MR6619 is a high thermal conductivity silicone electronic potting adhesive with good thermal conductivity and excellent flow performance. It has low viscosity before curing. After mixing the two components, it can be cured at room temperature or at elevated temperature. The higher the temperature is, the faster the curing is, ...

This series of products is two-component addition molding liquid silicone rubber, with good dimensional stability and excellent demoulding performance. It is widely used in the rapid prototyping of industrial products, the production of soft molds, and the preparation of other silicone rubber products.

MR1720AB additive liquid silicone rubber is mainly used for rubber dripping, such as webbing, elastic belt, sports headband, bag shoulder belt, seamless underwear, bra, etc. Mixing ratio: A: B=1:1. After curing, MR1720AB has high elongation, suitable softness, strong adhesion to webbing, high transparency, environmental protection and non-toxic.

MR6610AB is a silicone potting adhesive with high transparency, high strength and excellent performance. It has a low viscosity before curing. After mixing the two components, it can be cured at room temperature. Heating up can accelerate curing, and the material will not shrink during curing. This product can effectively prev...

MSK MR3559 is a kind of medium viscosity, which can be used to coat narrow edge synthetic fabrics, such as pants belt, top edge of stockings without suspenders, lace and other fabrics with single-component silicone webbing.

MR633 is a one-component deacetic silicone sealant. It is transparent and has good fluidity. It is suitable for coating and bonding of textile fabrics. After curing, the tensile strength is large, the adhesion is good, and it will not fall off after long-term use, and will not produce contact gap. Neutral non-corrosive, excell...

MR8002 is a one-component, corrosion-free, heat-conductive adhesive room temperature vulcanized silicone rubber. This product can pass the UL94 V-0 flame retardant test. It has good adhesion to metals and most plastics. It will not fall off after long-term use, and has certain thermal conductivity.