Other auxiliary materials

MSK-Y-21 shrinkage agent can improve the shrinkage of silicone rubber after vulcanization, and can effectively improve the phenomenon of over-size and over-length caused by various reasons. It is recommended to apply silica gel of MSK-Y-21 shrinkage paste, with Shore hardness below 55 º

Gravure conductive ink

This product is a one-component surface treatment agent composed of special structural compounds. It is mainly applicable to the surface treatment of PEI, ABS, PET, metal and other materials, so that the treated substrate and the unformed silicone rubber (platinum vulcanization) have a good bonding effect after hot molding and...

It is a silicon-free water-based fluoride release agent, which has the same or even better release performance than previous products, and is also a new release agent that meets the requirements of environmental regulations.

This series of products is a kind of single-liquid interface treatment agent composed of special structural compounds, which is mainly applicable to the surface treatment of nylon and glass fiber, plastic and metal, so that the treated substrate and the unformed silicone rubber (platinum vulcanization) have a good bonding effe...

The product is a delay agent of unsaturated hydrocarbons, mainly applicable to silica gel system.

This product is a one-component liquid product. It is mainly used for isolating silica gel from mold.

★ AE-313 is a substitute for ME-313 independently developed in China, with better cost performance< Br/>★ Fluorine-based material, excellent demoulding performance. AE-313 gives full play to the waterproof, oil-proof, anti-sticking and heat-resistant properties of fluoride, and forms a thin layer of fluorine film after coati...

DAIFREE GW-200 is a new release agent with the same release performance as the previous products ME-413A, ME-413, ME-414, GU-2080, and conforms to the environmental protection specifications. Please read the precautions before use.

MSK MD880 silica gel special transparent internal release agent is a colorless or light yellow transparent gel commonly used in transparent silicone rubber products with excellent release effect. It belongs to the fluorine type physical release agent and does not affect vulcanization at all. Its advantages are that it does not...

MSK 850AN food-grade silica gel release agent is made of imported raw materials and refined by special process. It is a high-temperature release agent with small proportion, easy to disperse, no white spots, and fast release speed, which does not affect the transparency of the product; Reduce the defective rate of finished pro...

MSK 850B internal release agent is a colloidal object commonly used in silicone products with excellent release effect. Its advantage is that the addition ratio is small, easy to disperse, and will not produce white spots.

MD886 silicone special transparent internal release agent is a colorless or light yellow transparent liquid commonly used in liquid silicone rubber products, with excellent release effect. It belongs to the fluorine type physical release agent, and does not affect vulcanization completely. Its advantages are that it does not a...

MSK C-15E high yellow-resistant curing agent has excellent dispersibility, fast curing speed, no yellowing during secondary curing, and high yellowing resistance. It is suitable for cross-linking of vinyl silicone rubber, polyethylene and ethylene-propylene rubber.

MSK C-14 high yellow-resistant and odorless curing agent has excellent dispersion, fast curing speed, tasteless vulcanized silicon products, and good yellowing resistance. It is suitable for cross-linking of vinyl silicone rubber, polyethylene, and ethylene-propylene rubber.

MSK C-8A fast curing agent has excellent dispersion, fast curing speed, low addition, no volatilization, environmental protection standard, and is suitable for cross-linking of vinyl silicone rubber, polyethylene, and ethylene-propylene rubber. It is applied to molding products made of various silicone materials, such as silic...

MSK G6 is a transparent paraffinic fluid, usually containing less than 1 ppm benzene and less than 1 ppm sulfur

MSK G5 is a transparent paraffinic fluid, usually containing less than 1 ppm benzene and less than 1 ppm sulfur

MSK G4 is a transparent isoalkane, usually containing less than 1 ppm benzene and less than 1 ppm sulfur

MSK G3 is a transparent isoalkane, usually containing less than 1 ppm benzene and less than 1 ppm sulfur