Chemical industry - film, tape and release paper

SG6220Z silicone condensation pressure-sensitive adhesive is a kind of silicone pressure-sensitive adhesive that belongs to condensation curing. It has low migration, stable viscosity, strong moisture resistance, heat resistance and weather resistance, and no "ghost" after removal. The coating has no bubbles, high transparency...

SG6260Z silicone condensation pressure-sensitive adhesive is a kind of silicone pressure-sensitive adhesive that belongs to condensation curing. It has low migration, stable viscosity, strong moisture resistance, heat resistance and weather resistance, and no "ghost" after removal. The coating has no bubbles, high transparency...

The product is a delay agent of unsaturated hydrocarbons, mainly applicable to silica gel system.

MSK SG 6950A adhesive is a kind of organosilicon pressure-sensitive adhesive that belongs to addition curing. It has low migration, stable viscosity, moisture resistance, heat resistance and weather resistance, and no "ghost" after removal. The coating has no bubbles, high transparency and excellent electrical insulation. Ther...

SC3318L pressure-sensitive adhesive is used in the production of adhesive tape for coating protective film and in the electronic assembly process< Br/>SC3318L pressure-sensitive adhesive and D5000C catalyst have cross-linking reaction. When the standard formula is used, SC3318L: SG6500A: D5000C=100:1/2:1

SC3310L pressure-sensitive adhesive is used in the production of adhesive tape coated with protective film and in the electronic assembly process< Br/>SC3310L pressure-sensitive adhesive and SK0010C catalyst undergo cross-linking reaction. When the standard formula is used, SC3310L: SG6500A: SK0010C=100:1/2:1/2

SC3308L pressure-sensitive adhesive is used in the production of adhesive tape coated with protective film and in the electronic assembly process< Br/>Crosslinking reaction between SC3308L pressure-sensitive adhesive and SC6500A and D5000C catalysts

This product is an additive silicone anchoring agent, which can improve the adhesion of silicone pressure-sensitive adhesive to PET, PBT and other materials without affecting the mechanical properties of silicone products.

Additional anchoring agent

Additional type

SC0018B is a polysiloxane containing hydrogen atoms bonded by silicon.

D5000C is a silica gel platinum catalystD5000C is a solvent-based catalyst and insoluble silica gel PSA coating

ZXF-16A/B is specially developed for surface coating of TPU and PC materials. Under the condition of hot drying, the resin reacts rapidly,. This product has the characteristics of surface drying and rapid hardening. It is directly glued to TPU and PC chips by coating, so that the base material has excellent repair performance ...

HSN10-0 is a special adhesive for various plastic substrates, glass, metal, etc. Under the irradiation of UV light, the resin reacts rapidly and has strong adhesion before UV light. This product has a good adhesive force. It is not easy to slip off after fitting the protected object. It has good heat resistance. It has a very ...

The antistatic agent additive specially added for PU PSA pressure-sensitive adhesive is a permanent antistatic agent, which can solve the problems of poor dispersion and poor antistatic resistance

MSK ® The special additive antistatic agent for PU PSA pressure-sensitive adhesive is a permanent antistatic agent, which can solve the problems of poor dispersion and poor antistatic resistance.

High exhaust, low adhesion, good transparency, good weather resistance, no yellowing, cold resistance, hydrolysis resistance, low processing viscosity and easy operation,

Low peeling force, high temperature resistance of 150 ℃ for 5 hours, no yellowing, hydrolysis resistance, no whitening after environmental testing and high temperature baking, the use of 52 dyne value base film can resist cutting and no debris, and the repeated inspection after full ripening without glue residue and silicon t...

OCA-38 pressure-sensitive adhesive is a kind of product that uses ultraviolet radiation to achieve curing. Non-pollution, low energy consumption and high efficiency are the main characteristics of UV pressure-sensitive adhesive. It has the characteristics of strong adhesion, fast curing speed and simple operation. In addition ...

UV pressure-sensitive adhesive is a kind of product that uses ultraviolet radiation to achieve curing. Non-pollution, low energy consumption and high efficiency are the main characteristics of UV pressure-sensitive adhesive. It has the characteristics of strong adhesion, fast curing speed and simple operation. In addition to t...